Feeds & Speeds Calculators

Aqua EX 3 Flute Calculator

Aqua Drill EX Oil Hole 3 Flute 3XD/5XD

Series/Material/Diameter:

Material to Machine:

Drill Diameter (Decimal Format)

Suggested Starting Parameters:

SFM -
RPM -
IPR -
IPM -
MM/Rev -
m/min -
Cutting Percentage -
 
Notes:
  1. High pressure coolant (1000PSI) recommended for Oil Hole drills.
  2. Always use caution and best judgement when applying updated speeds/feeds.
  3. Be sure to read chips to validate speeds/feeds.
  4. When selecting a drill, 2XD of flute length stickout beyond hole depth is recommended for most applications.
  5. Each individual application is different than the next.
  6. Rigidity of workpiece, tool holders, etc. may contribute to optimal feed rates.
  7. Nachi America assumes no liability for any results due to application of these speeds/feeds.
Decimal Converter

MM = 0 Decimal Eqiv.