Feeds & Speeds Calculators

AQUA V 4 Flute

Nachi LIST Number(s): 9701, 9702, 9703, 9704

Select Dia., Cut Width & Material:

Mill Diameter:

Width of Cut:

Work Material:

Suggested Starting Parameters:

Cut Depth -
Width of Cut -
SFM -
RPM -
Feedrate (IPT) -
Feedrate (IPM) -
 
Notes:
  • For Entry, it is recommended to reduce RPM and IPT by 50%.
  • Adjust milling condition when unusual vibration or sound occurs.
  • When using long reach, neck relieved tools, decrease width of cut and feed rate by 50%.
  • Recommended feed and speed are starting points only and may require adjustment based on specific material, machine condition, setup rigidity, and tool holder type.
  • If assistance is needed please reach out to the cutting tools technical team.

Nachi LIST Number(s): 9701, 9702, 9703, 9704

Select Dia., Cut Width & Material:

Mill Diameter:

Work Material:

Suggested Starting Parameters:

Cut Depth -
Width of Cut -
SFM -
RPM -
Feedrate (IPT) -
Feedrate (IPM) -
 
Notes:
  • For Entry, it is recommended to reduce RPM and IPT by 50%.
  • Adjust milling condition when unusual vibration or sound occurs.
  • When using long reach, neck relieved tools, decrease width of cut and feed rate by 50%.
  • Recommended feed and speed are starting points only and may require adjustment based on specific material, machine condition, setup rigidity, and tool holder type.
  • If assistance is needed please reach out to the cutting tools technical team.

Nachi LIST Number(s): 9701, 9702, 9703, 9704

Select Dia., Cut Width & Material:

Mill Diameter:

Work Material:

Suggested Starting Parameters:

Cut Depth -
SFM -
RPM -
Feedrate (IPT) -
Feedrate (IPM) -
 
Decimal Converter

MM = 0 Decimal Eqiv.