Feeds & Speeds Calculators

Aqua Hard Mills

Aqua Hard Mill

Select Material/Cutting Condition/Diameter.

Material:

Cutting Condition:

Diameter:

Suggested Starting Parameters:

RPM -
Feedrate (IPT) -
Feedrate (IPM) -
WOC (Radial) -
DOC (Axial) -
Feedrate (mm/t) -
Feedrate (mm/min) -
WOC (Radial) (mm) -
DOC (Axial) (mm) -
Notes:
  1. Air blow recommended. Do not use flood coolant with hard mills.
  2. Performance of hard mills is dictated by heat evacuating in the chips. Adjust speeds/feeds and width of cut to pull enough heat in chip. Chips should maintain color (blue, purple, etc.)
  3. Always use caution and best judgement when applying updated speeds/feeds.
  4. Each individual application is different than the next. Rigidity of workpiece, tool holders, etc. may contribute to optimal feed rates.
  5. Nachi America assumes no liability for any results due to application of these speeds/feeds.