Feeds & Speeds Calculators

Aqua Flat Calculator

List Numbers: L9610, L9611, L9816, L9817, L9818, L9819, L9830, L9831

Select Material & Diameter:

Series

Material to Machine:

Drill Diameter (Decimal Format)

Entry Type:

Suggested Starting Parameters:

Entry -
SFM -
RPM -
Feedrate (IPR) -
Feedrate (IPM) -
Feedrate (MM/Rev) -
Feedrate (mm/min) -
Cutting % -
 

List Numbers: L9812, L9813, L9814, L9815

Select Material & Diameter:

Series

Material to Machine:

Drill Diameter (Decimal Format)

Entry Type:

Suggested Starting Parameters:

Entry -
SFM -
RPM -
Feedrate (IPR) -
Feedrate (IPM) -
Feedrate (MM/Rev) -
Feedrate (mm/min) -
Cutting % -
 
Notes:
  1. Use calculated drilling conditions as a general guide, when starting operation.
  2. Adjust drilling conditions according to the rigidity of machine or work clamp state.
  3. When drilling Drilling Angled surfaces use calculated table values based on your angle of entry
  4. When drilling Curved surfaces use calculated table value for curved surfaces.
  5. Aqua Flat drills cannot be used for pocket milling.
Decimal Converter

MM = 0 Decimal Eqiv.