Feeds & Speeds Calculators

Aqua REVO Calculator

Nachi LIST Number(s): L9860, L9861, L9862, L9863

Select Material & Diameter:

Series

Material to Machine:

Drill Diameter (Decimal Format)

Suggested Starting Parameters:

SFM -
RPM -
Feedrate (IPR) -
Feedrate (IPM) -
Feedrate (MM/Rev) -
Feedrate (m/min) -
Cutting % -
Peck Increment -
 
Notes:
  1. Always use caution and best judgement when applying updated speeds/feeds. Be sure to read chips to validate speeds/feeds.
  2. When selecting a drill, 2XD of flute length stickout beyond hole depth is recommended for most applications.
  3. Each individual application is different than the next. Rigidity of workpiece, tool holders, etc. may contribute to optimal feed rates.
  4. Nachi America assumes no liability for any results due to application of these speeds/feeds.

Nachi LIST Number(s): L9864, L9872, L9873, L9866, L9874, L9875, L9868, L9868D, L9869

Select Material & Diameter:

Series

Material to Machine:

Drill Diameter (Decimal Format)

Suggested Starting Parameters:

SFM -
RPM -
Feedrate (IPR) -
Feedrate (IPM) -
Feedrate (MM/Rev) -
Feedrate (m/min) -
Cutting % -
Peck Increment -
 
Notes:
  1. Always use caution and best judgement when applying updated speeds/feeds. Be sure to read chips to validate speeds/feeds.
  2. When selecting a drill, 2XD of flute length stickout beyond hole depth is recommended for most applications.
  3. Each individual application is different than the next. Rigidity of workpiece, tool holders, etc. may contribute to optimal feed rates.
  4. Nachi America assumes no liability for any results due to application of these speeds/feeds.
Decimal Converter

MM = 0 Decimal Eqiv.